AquaLog
Master Your Water Chemistry
Consistent water parameters are the key to a thriving aquarium. Use this tool to calculate CO₂, determine dosing, and log your test results to spot trends.
Data entered here is temporary and will be cleared if you refresh the page.
Tip: If you want to compare today's results with the past, enter your previous test results first (backdate them), then enter today's results.
Quick Calculators
Instant tools for daily maintenance tasks.
● CO₂ estimator
Estimated CO₂
0 ppm
Safe Range
● Water Change Dosing
Replace
0 gal
Conditioner
0 ml
*Based on standard 5ml per 50gal concentration
New Log Entry
Record your latest test results.
System Status
No data logged yet.
Latest Reading
-
pH Level
-
Nitrate (NO₃)
-
KH (dKH)
Analysis & Recommendations
Awaiting data... Log your water parameters to receive specific advice on your tank's chemistry balance and safety.
Recent Logs
| Date | pH | NH₃ | NO₂ | NO₃ | KH |
|---|
Historical Trends
Visualizing parameter stability over time.
Nitrogen Cycle (Toxicity)
Goal: Ammonia (NH₃) & Nitrite (NO₂) should be 0. Nitrate (NO₃) should be low.
Water Chemistry (Stability)
Stability is more important than chasing "perfect" numbers.
The Invisible Ecosystem
Clear water isn't always "clean" water. This log helps you track the invisible chemical balance that keeps your fish and shrimp alive.
🔄 The Nitrogen Cycle: Your Tank's Engine
The most important thing to track is the Nitrogen Cycle. This is nature's way of processing waste. When you log your numbers, look for this healthy pattern:
- Ammonia (NH3): Toxic waste from fish poop and uneaten food. In a cycled tank, this should always be 0 ppm.
- Nitrite (NO2): Bacteria convert Ammonia into Nitrite. This is even more toxic than Ammonia. It must also be 0 ppm.
- Nitrate (NO3): The final byproduct. It is less toxic but feeds algae and stunts growth in high amounts. Keep this under 20-40 ppm.
*If you see Ammonia or Nitrite rising, perform an immediate water change. Your cycle may have crashed.
⚖️ Stability > Perfect Numbers
Beginners often try to chase a "perfect pH" of 7.0 using chemicals. Do not do this.
Most fish and Neocaridina shrimp can adapt to a wide range of pH (6.5 - 8.0) as long as it is stable. A pH that swings from 6.8 to 7.2 in one day is far more deadly than a steady pH of 7.4.
Why Log It?
Problems in an aquarium rarely happen overnight; they happen slowly. By tracking your parameters weekly, you can spot a trend (e.g., "My Nitrate is creeping up every week") and fix it (clean the filter) before your algae blooms.
Water Testing FAQ
How often should I test my water?
For a new tank (< 2 months old), test every 2-3 days to monitor the cycle. For a mature, stable tank, testing once a week before your water change is sufficient. If you see sick fish, test immediately.
What about GH and KH?
GH (General Hardness) measures Calcium and Magnesium, which shrimp need for healthy shells (molting). KH (Carbonate Hardness) acts as a buffer that prevents your pH from crashing. If your pH is swinging wildly, your KH is likely too low.
No comments:
Post a Comment